Stanadyne Roosa Drive Seals and Line Washers for Diesel Injection Pump

$24.50

Stanadyne Roosa Drive Seals and Line Washers for Diesel Injection Pump Repair


PLEASE see the fitment guide below!

This kit includes 12 line washers (16255) and 2 drive seals (10453).


Note: With all Stanadyne / Roosa Master Pumps, it is a good practice to tie the throttle lever in Wide Open position anytime the pump is going to be off the engine.

5 in stock

Description

Stanadyne Roosa Drive Seals and Line Washers for Most Stanadyne / Roosa Master Diesel Injection Pump


Replaces Stanadyne P/N: 10453 (seals) and 16225 (line washers)

These are the Stanadyne Roosa Drive Seals and Line Washers for diesel injection pump needed for installing most Stanadyne / Roosa Master diesel injection pumps.

This kit includes 12 high PSI line washers and 2 drive seals.

We sell a couple of tools that repair shops use to do this job. We recommend this one (PN: 13371) if want to make the repair a bit easier. Stanadyne also sells this one (PN: 22727) as well.


Fitment Guide for this kit:

In most cases, This kit DOES fit all pumps with model numbers that start with:

  • JDB
  • DBG
  • DBM
  • DBO
  • DCB
  • DCM

In most cases, This kit DOES NOT fit pumps with model numbers that start with:

  • DB2
  • DB4
  • DM
  • DES
  • DS
  • CBC
  • CDC

Stanadyne Roosa Drive Seals and Line Washers Installation notes:

NOTE: With all Stanadyne / Roosa Master Pumps, it is a good practice to tie the throttle lever in Wide Open position anytime the pump is going to be off the engine.

This kit comes new, never before used, and in a sealed package.

You might notice a greasy and/or gritty substance on the line washers.  This is just how they come from the manufacturer.  It’s an anti-corrosion coating they put on them, and it picks up stuff really easy.  You can leave it or wipe it off: it really doesn’t make much of a difference.  Thanks


Need anything else?

These drive seals and line washers actually come as a part of our most popular kit.

Do you need just the line washers?  Or just the drive seals?

Does your pump also need new pilot bushings?  We sell those too!

What about a replacement return check ball?

Transfer pump liner?

These transfer pump blades fit some of the same pumps as this kit.


If none of this sounds like what you need:

Check if we have what you need in our store!  Contact us here, email us (jason@dieselitems.com), or call us (Mon-Friday, 8am-4pm)!

We’ll help you find what you need.  We are here to help!

Additional information

Brand

,

PA65 WARNING

Pump Manufacturer

Roosa Master Stanadyne

Reviews

There are no reviews yet.

Be the first to review “Stanadyne Roosa Drive Seals and Line Washers for Diesel Injection Pump”

Your email address will not be published. Required fields are marked *

You may also like…