AP0028 Stand Pipe Front Port Plug Seal Kit Alliant Power for Ford 6.0L / 4.5L PowerStroke

Description

AP0028 Stand Pipe Front Port Plug Seal Kit Alliant Power for Ford 6.0L / 4.5L PowerStroke

Item Description: Alliant Power AP0028 Stand PipeFront Port Plug Seal Kit for Ford Powerstroke 4.5L / 6.0L.

“Ford® and Navistar® no longer offer the individual stand pipe and front port plug seals, requiring the
purchase of new stand pipe and front port plug assemblies when the system is serviced. Alliant Power
has introduced a seal kit, as an alternative to replace the stand pipe and port plugs, for use on 6.0 L and
VT365 engines that utilize the wavy oil rail. This seal kit also applies to all 4.5 L, VT275 and MaxxForce 5
engines.
The AP0028 kit provides the seals and backup rings required for one stand pipe and one front port plug.
Therefore, two kits are required to reseal all the stand pipes and front port plugs on one engine. Please
refer to the table below for kit contents. The AP0028 kit will work for the one piece and two piece stand
pipe configurations, as well as both the New and Old Style of stand pipes and port plugs. If the kit is
being used on a two piece stand pipe, there will be one of the small D-rings left over. If the kit is used on
the Old Style stand pipes the backup rings will not be used (see next page for proper identification). The
AP0028 kit is not used for the straight rail configuration, as removal of the stand pipe is not required.”

– (From the Included information packet)

Fitment guide for AP0028 Stand Pipe Front Port Plug kit:

• 2003-2007 F Series
• 2003-2007 Excursion
• 2004-2010 E Series
• 2006-2010 4.5L LCF
• Requires 2 kits per engine, 1 kit per side

Need anything else?

Remember to please send us your application if you are not sure if this Alliant Power AP0028 Stand Pipe & Front Port Plug Seal Kit is right for your particular application.

You can call us, use our contact form, or even send us an email directly (jason@dieselitems.com)

Thanks!