Stanadyne 17722 Return Fitting Tee on John Deere Pencil Injector

Description

Stanadyne 17722 Return Fitting Tee & Nut for John Deere Pencil fuel Injector

---

Item Description: Genuine OE Stanadyne 17722 Return Fitting & Nut for John Deere Pencil Injectors.

Part Number: 17722

---

Installation tips:

1. First unscrew the tee and set aside.
2. “Gently” clamp nut in to a vise and force injector through old grommet by pulling, twisting and WD40, do not loosen any of the nuts on top of the injector itself, this could change settings. I guess one could pick out the old grommet with a probe but would be tedious. (Use care not to warp nut with the vice)
3. Slide on nut without the grommet and then poke in new grommet.
4. Slide nut and grommet up and thread onto the tee, the assembly does not have to be very tight to seal.

---

Fitment guide for Stanadyne 17722 Return Fitting:

   John Deere Models:

• Backhoe, Loader: 300b 302A 310 310A 401c 410
• Bulldozer: 350B 450 450B 450c 550 750
• Combine: 3300 4400 4420 6600 920 925 930 932 952 955 965 985
• Forklift: 380 480 480a
• Grader, Motor: 570 670 670A
• Harvester, Forage: 5420
• HI-Cycle: 6000
• Loader, Crawler: 350 350c 450c 555 755
• Loader, Four-Wheel Drive: 444 544 544B
• Loader, Skid-Steer: 24
• Loader, Two-Wheel Drive: 301 301a 302 400 401B
• Picker, Cotton: 9900 9910
• Power Unit: 135 180 219 303 329
• Skidder, Log: 440 440c 540 540B 640
• Stripper, Cotton: 484
• Tractor 1020 1030 130OU 1030VU 1035 1035EF 1035EV
  1520 1530 1830 2020 2030 2035 2040 2240 2440
  2510 2520 2630 2640 2840 3030 3120 4030 4040 820(3 Cyl.) 830(3 Cyl.)

Please note that this list is Non-exhaustive.  There are so many models that these return fittings go on.

---

Note:

Comes new, never before used in the OE packaging seen in the photos.

---

Need anything else?

Check if we have what you need in our store!  Contact us here, email us ([email protected]), or call us (Mon-Friday, 8am-4pm)!

We’ll help you find what you need.  We are here to help!